Si-701 Simple Construction, Superior Adhesion

Precautions before the practice 

Instructions 

Si-701 glass coating agent practice method 

1. Drip Si-701 glass coating agent to coating sponge for 7-10 drops, first swear it laterally, then swear it vertically with "#" pattern, recommended at 50cm*50cm for each practice area, and note the usage quantity, since excessive usage per time may lead to non-uniform smearing or wiping obstruction; 

2. Postpone for 2-8 minutes after smearing, then use a dry towel to clear surface residue whilst wiping the glass coating film with polishing brightness. Wiping duration recommendation: 30℃=within 3 min, 20℃=within 5 min, 10℃=within 8 min, glass coating hardening rate is directly correlated with temperature and humidity, thus it is recommended to measure local temperature and humidity before determining the wiping duration; 

3. Check wiping omission for each part under completion, until the whole vehicle is covered; 

Precautions

1. Do not smear the whole vehicle by one time, to avoid difficulty of post-hardening treatment, please carry out practice part by part; 

2. While wiping dry, observe the surface in well lighted location, to avoid remaining residue, and if indoor illumination is inferior, drive the vehicle outdoor to conduct inspection and wiping in full range, to ensure perfect practice quality; 

3. After practice, complete hardening of the coating film requires around 1 week, thus do not engage water or rinse the vehicle before complete hardening; 

4. This product is a mild irritant to human body, please wear protective gloves if allergic with its practice

http://www.kisho-coating.com/